DESCRIPTION

Failure of paint to dry to a smooth film, resulting in unsightly brush and roller marks after the paint dries.

POSSIBLE CAUSE

• Application for paint too much during or refreshing or re-rolling in areas where the paint has dried.
• “Working” paint too much during application.
• Use of the wrong type or map size of roller cover. Use of the wrong type or size of brush.
• Applying too thin of a paint film.
• Painting a hot surface or in direct sunlight.
• Coating a very porous surface.

SOLUTION

• Allow the coating to dry thoroughly, send the coating smooth, and repaint.
• Wait until the dried thoroughly before touching up.
• Follow level and data page directions for the appropriate film building.
• Follow level and data page directions for the appropriate environmental conditions.
• Prime or seal porous surfaces.

SYSTEM

INTERIOR

Suggested Finishes – Reapply the same or an upgrade coating.

EXTERIOR

Suggested Finishes - Reapply the same or an upgrade coating.