Sponging and ragging techniques are useful in creating a mixture of colors that adds texture and covers imperfections on the wall. Both techniques, ( sponging and ragging) utilize the same materials, except for the type of application used. Additionally, the individual may select from two to three colors, as well as achieve a variety of effects in sponging and ragging .

The basics ofsponging and ragging begin with the surface for application being prepared – cleaned, free of debris and ornamentation. For both the sponging and ragging techniques apply a coat of the first color that you desire for the wall. This is the background color and will serve to compliment the other color(s) used for the sponging and ragging technique. Allow this background color to dry thoroughly before proceeding to the second step for the sponging and ragging techniques.

Next, you will prepare a glaze mixture for the texture of the wall for sponging and ragging . The glaze mixture should be comprised of two parts glaze and one part paint.

If sponging, the technique can be accomplished with a sea sponge, rags, plastic, or plastic bags. Any of these tools can create the same effect in sponging. Dip the tool into the glaze mixture and then begin to dab the wall, being careful not to load too much of the glaze mixture onto the applicator that may cause the mixture to run. When the surface is complete, allow to dry. In sponging it is possible to add a third color to the pattern, but it is advisable to make sure that all colors compliment each other and will work with the décor.

Ragging can have the same effect as sponging if the glaze mixture is blotted on the wall over the background coat. However, in ragging it is also possible to twist the rag lengthwise and roll it across the surface, which creates a swirling effect in the paint.